How to sequence condo cleaning and furniture assembly on move day
West: Canoe Landing and CityPlace. Centre: Union Station and South Core. East: St. Lawrence Market. South of Front Street: Harbourfront and Queens Quay.
These public landmarks orient the route. Give workers the exact service entrance and loading instructions for your building.
Build the day around the loading reservation
Ask the condo office to confirm when loading access begins and ends, which door the crew should use, and who will be able to open it. If the building uses separate reservations for loading and the elevator, check both times. Ask where drivers can wait if the space is occupied or they arrive early. Find out who will contact you on arrival and which resident or representative needs to be present. Put those instructions in the confirmation rather than relying on a general note to use the garage.
Check which part of your plan is least flexible. It may be a truck's arrival, a key handoff, or the end of a reserved elevator window. Put that commitment on the schedule first and work around it. If a delivery can only happen during a fixed period, leave enough time for the crew to sign in, move the items, and clear the loading area before the reservation ends. Ask what happens if the truck is delayed so you know whom to call while you still have time to adjust.
Use the Toronto map for general orientation. Give each service the exact street address, tower, and entrance it should use. A loading door and a visitor lobby can face different streets even if they serve the same unit. Tell the cleaner and assembler whether their directions differ from those given to the delivery crew. If the garage or elevator procedure changes on the day, send one updated set of directions to each affected party. Confirm that they know where to go before asking them to change their arrival time.
Choose which rooms can be cleaned before the delivery
Walk through the condo before deciding when to book the cleaner. Note the areas that are empty, the paths that people will use to carry furniture, and the spaces where boxes will be placed. A room that is empty at the start of the day may be useful to clean before anything is delivered. A hallway that will be used for several trips may be better dealt with after the last large item goes through. Decide which surfaces you want cleaned first and tell the cleaner which areas may need to stay clear for the crew.
If the cleaner has a limited window, agree on a short priority list. You may want an empty kitchen or bathroom ready for use while delivery is underway elsewhere. Ask which tasks fit the booked time and what the cleaner needs from you to reach those areas. If a room will remain unavailable until boxes are moved, mark it as pending and ask whether it can be done later. Keep that item separate from the work the cleaner can complete during the first visit.
Tell the cleaner if the unit contains items you want left where they are. Identify any fragile belongings and any surfaces with specific care instructions. Ask which supplies the cleaner expects to bring and where they can be placed. If another service will need the same work area, reserve different time windows or ask whether the tasks can be done in separate rooms. Give the cleaner a clear route from the entrance to the rooms on the list and tell it whom to contact if something is still blocking an area when it arrives.
Create a place for boxes inside the unit
Choose an area where the delivery crew can set boxes down while furniture is being moved or assembled. Keep the path from the suite entrance to the work area open, including room for doors to swing. Use the building's approved areas for any temporary staging outside the unit and confirm the restrictions before directing the crew. A spot that is convenient for setting down one box can become a problem once several more arrive. Plan where the first group of boxes will go and where the next group can be placed without blocking access.
Label boxes by room or by the task they belong to. If an assembler will need a particular package, make it easy to find without opening several others. If you want a room to stay empty until cleaning is finished, tell the delivery crew which items should wait in the staging area. Agree on who will redirect boxes if the planned room is unavailable. This is easier when one person can answer questions and both the cleaner and crew know whom to ask.
Think about how the staging plan will change after assembly. Some cartons can stay with the furniture until the assembler has confirmed which parts are needed. Others can be moved once you have checked the contents. Ask each service what it expects you to do with packaging and when it wants the work area cleared. Check the building's disposal instructions before moving anything into a shared area. At the end of the day, identify boxes that still need to move and assign them a location rather than letting them stay in the main walking route.
Schedule assembly when the right furniture and space are ready
Give the assembler a list of the pieces you expect it to work on and the location of each one. Ask what information it needs about the products and what should be ready when it arrives. If the furniture is being delivered that day, allow time for the crew to bring the boxes into the unit and for you to check that the intended packages have arrived. Ask whether the assembler can work on other pieces if one delivery is delayed. Confirm which items the appointment covers before relying on the booked window.
Leave the assembler enough clear space for the work it has agreed to do. Ask what area it needs and whether it prefers the packages to remain in the room where the furniture will go. If another service is using that room, agree on when it will be available. Give the cleaner and assembler different time windows for the same space where possible. If both appointments overlap, identify which rooms each can reach without crossing the other's work area. If the arrangement changes, check that each service can still complete its agreed work.
If an item requires building approval or falls outside the work you booked, keep it off the active list until you clarify what can proceed. Ask the assembler which part it can assess and what information it needs before quoting anything additional. If a piece cannot be completed because a part is missing or a room is unavailable, note the reason and ask what must be ready for another visit. Record that item separately from the pieces completed on the day so the next appointment has a defined scope.
Give each service one contact for arrival and changes
Decide who will meet the delivery crew, cleaner, and assembler. If different people are responsible, tell each service which person will handle its arrival. Share the appointment time, entrance, suite, and the contact number that person can answer. If the concierge needs to call the resident, verify how that call will reach you. Give the person meeting the service enough information to explain the planned scope, particularly if they did not make the booking. Keep any private access details in the confirmed booking conversation.
If the truck or elevator is delayed, identify which service is affected first. For example, a delay may stop the assembler from starting while the cleaner can still work in another room. Give each service the updated arrival estimate and explain what space or materials will actually be ready. Ask what it can accommodate within the original window and what would need to move. Wait for each service to confirm the revised plan before telling the next person to rely on it. Record the current timings in one place.
If the building changes the loading procedure, confirm the new route with the office before redirecting the crew. Identify where it can stop, where it can enter, and who will meet it. If another person is waiting at the original entrance, update them as soon as the new arrangement is confirmed. Keep the building reservation and the service bookings separate so you can identify which one needs to change. A clear update says what has changed, when it applies, and what the recipient should do when they arrive.
Finish with a short walkthrough
Check the rooms in the order you planned to use them. Start with the areas the cleaner was expected to cover and note which were ready, which were completed, and which remain blocked by boxes. Then check the furniture list with the assembler if they are still there. Record which items were assembled and which need parts or a return visit. If you notice a separate repair issue, describe its location and ask the appropriate party how to arrange it. Keep that request separate from the cleaning or assembly report.
If a return visit is needed, identify the first action. The cleaner may need you to clear a room, the assembler may need a package to arrive, or building management may need to approve access. Write the person responsible and when you expect the condition to be met. Confirm the actual appointment once the prerequisite is settled. A note that says only to finish the room does not tell a service whether the issue is cleaning, assembly, or a repair. A dated list by service gives each one a usable scope.
Example of a move with separate service windows
A resident has a morning elevator reservation and expects bedroom furniture to arrive during it. They arrange for the empty bathroom and kitchen to be cleaned before the truck arrives. They keep the route to the bedroom available and use a corner of the living room for labelled boxes. The assembler has a later window and knows which packages it should be able to find. When the truck arrives later than expected, the resident tells the assembler which pieces are delayed and asks what can still be done. At the end of the day, they record the completed furniture, the area to clean after unpacking, and the one item that needs another booking.
Before your own move, put the loading window, exact entrances, room priorities, staging area, and service contacts in one note. Add the time each room is expected to become available and which task depends on it. Review the note when a delivery changes and send each service only the update it needs. After the walkthrough, save the remaining items by service and write down who will arrange each next step. That gives you a workable record even if the move day did not follow the schedule exactly.
Check who owns the first hour of the next day
If the work continues the following morning, decide which person or service gets access first. Check whether the building has confirmed another loading window or whether the next visitor should enter through the lobby. Move the boxes that still block the next work area, using the staging locations you agreed on. Send the next service only the current list, including anything you want it to leave untouched. If you will be at work, give the person meeting the service a copy of the list and the confirmed time. Ask them to record what changes during the visit so the notes still reflect the condition of the unit when you return.